XTOOL DUAL STATION FOR WONDERPRESS

Press on One Side, Prepare on the Other

The Dual Station addresses one of the main sources of downtime in batch heat pressing: waiting to prepare the next garment until the current cycle has finished. With two working stations, the next project can be aligned and prepared while WonderPress processes the previous one.

When the pressing cycle is complete and the heating plate rises, slide the other station beneath the heating plate and start the next process. The finished garment can then be removed while the next one is being pressed, creating a more continuous workflow.

Smooth Sliding Station Change

The Dual Station uses a sliding rail that allows the two workstations to move from side to side. A gentle push moves the prepared station directly beneath the WonderPress heating plate, reducing the handling required between individual pressing jobs.

This workflow is particularly useful when producing multiple garments or repeating similar transfer jobs, where preparation time between pressing cycles can otherwise become a bottleneck.

Designed for Batch Production

By separating pressing and preparation into two stations, the Dual Station helps make better use of the time during each heat press cycle. Instead of waiting for WonderPress to finish before positioning the next garment, preparation can take place simultaneously.

This makes the accessory especially suitable for users producing multiple customized garments, DTF transfers and other flat heat transfer projects where consistent throughput is important.

Two Heat Press Modules

The Dual Station is designed to operate with two Heat Press Modules, one installed on each station. This allows both sides of the sliding platform to remain ready for heat pressing without having to move a single module between stations.

Manual Start for Controlled Processing

When the Dual Station is installed, WonderPress does not support Auto Mode. After moving the prepared station beneath the heating plate, press the start/stop button to begin each processing cycle manually. The heating plate rises automatically once the cycle is complete.

Built for the WonderPress System

The Dual Station integrates directly with the xTool WonderPress platform. Installation replaces the standard base setup with the Dual Station base and adds a stabilizing stand to support the expanded working configuration. Once installed, two Heat Press Modules can be positioned on the sliding stations for a streamlined batch workflow.

Important Installation and Safety Notes

Install and operate the Dual Station on a level, sturdy work surface capable of supporting the combined WonderPress and Dual Station setup. Keep the sliding path clear of obstacles so the stations can move freely.

The Dual Station contains strong magnets. People with pacemakers or other implanted medical devices should maintain a minimum distance of 15 cm. Magnetic cards, mechanical watches and magnet-sensitive electronic devices should also be kept away from the Dual Station base.

What's in the Box

• Dual Station base
• Stabilizing stand
• Heat Press Module
• Thumb screw 1
• Thumb screw 2
• Quick Start Guide